Small Weather Station for Real Time Environmental Monitoring over Cloud

  


To Industrial IoT/Networking/Embedded partners,

 

Small Weather Station for Real Time Environmental Monitoring over Cloud

The ES107 series is an integrated outdoor sensor unit for all types of environmental and weather monitoring sensors include illumination, temperature, humidity, noise, Atmospheric Pressure, wind direction, wind speed, and CO2 or PM2.5&10. The monitored data is output through RS-485 interface by Modbus protocol.  The ES107 sensor unit accepts 10~30Vdc power input voltage and is protected by the IP65 grade Anti-U/V lightweight ABS louver radiation shield. The mounting kit can be installed over the pole top. With the optional NBIoT/WiFi gateway WR222, LoRa end node LC144, or outdoor SCB111-RS485 NBIoT gateway, the data can be monitor on the cloud platform.  The ES107 sensor unit can be widely applied in agriculture, residential or industrial area weather and air quality monitoring, and remote weather stations.

•Intergraded multiple sensors with a signal RS485 Modbus output
•Weather Protected Enclosure
•Customized Shutter Height and Parameters
•High Sensitivity and Accuracy
•Noise Measurement from 30dB~120dB
•PM2.5 and PM10 Measurement 0-1000ug/m3, Accuracy 1ug/m3
•CO2 Measurement 0-5000ppm, Accuracy 1ppm
•Wide 0-120Kpa Atmospheric Pressure


Small Weather Station for Real Time Environmental Monitoring over Cloud

JOIN THE 30MIN FREE WEBINAR ON LORA IO REMOTE MAPPING

Low-Power Wide-Area Networks (LPWAN) have developed in multiple ways, especially in environmental monitoring and smart farming. Digital and Analog Input Output controls can be extended through wireless LoRa technology. It will be a great benefit for multiple controllers as a group for IO tracking and forwarding.  Join us at 10AM CET time on May.21 and learn more.


The LPWAN webinar series cover the following topics:
1. LoRa Controller introduction and LM/LC Demo- Feb.20
2.  LoRaWAN introduction and 322 LORA/OTA demo- Mar.19
3.  Weather Station Sensor introduction and ES105 demo- Apr.23
4.  LoRa IO Remote Mapping and Water Quality Sensor- May.21
5.  Smart Waste Bin Fill Level Monitoring introduction and Demo- Jun.18
6.  Water Meter Reading introduction and demo- Jul.23
 

 Register here
 

*OUTDOOR WATERPROOF LONG RANGE WIRELESS AP

Outdoor Waterproof Long Range Wireless AP
 
WA212BP is a high performance, 802.11n compliant, IP55 waterproof outdoor wireless AP/ Router with wireless coverage reaching up to 2km. It equips with highly sensitive, high power, and high gain 2T2R MIMO antennas that bring data rate up to 300Mbps. The dual Ethernet ports support NAT Routing and firewall/VPN connectivity. One Ethernet port receives PoE power input, and the other Ethernet port delivers PoE power output. A web-based GUI provides easy and secure management, as well as the firmware upgrade. The mini USB port can be used to add cellular dongles. WA212BP is an ideal entry-level high-speed long-range wireless communication solution for outdoor applications.
  • Compliant with IEEE 802.11n with 2T2R MIMO and data rate up to 300Mbps
  • Long wireless transmission distance up to 2 km
  • PoE pass-through to deliver power for AP or IP camera
  • Outdoor waterproof IP55 enclosure
  • -30~60oC operating temp. & 24V PoE input
  • ThingsMaster OTA Management
  • Pole mount installation for Highway, Port, Airport, Factory & Building applications​

* SECURE REDUNDANT AND HIGH SPEED ROUTING RACKMOUNT L3 SWITCH WITH VPN NAT FIREWALL AND CLOUD MQTTS OTA SUPPORT

 Secure Redundant and High Speed Routing Rackmount L3 Switch with VPN NAT Firewall and Cloud MQTTS OTA Support

The rackmount layer 3 managed 
RS628 with 20 Giga copper ports, four Giga combo ports and four 100M/1G fiber SFP slots supports full Layer 3 IP routing including static route and dynamic routing RIP, OSPF, VRRP protocols. It comes with critical cybersecurity features such as Port-Based Security- IEEE802.1 x MAB (MAC Authentication Bypass) , Access Control List (ACL, MAC/IP/ARP filter), DHCP Snooping, IP Source Guard, Dynamic ARP Inspection as well as advanced redundancy features such as WoMaster ERPSv2 Plus and eRSTP. The rugged design and high EMC immunity design makes the new RS628 an ideal solution for power substation, industrial control room, roadside traffic control, and industrial Surveillance applications.

  • Multiple Redundancy ITU ERPSv2, ERPS Plus, RSTP, eRSTP
  • High Level Cyber Security DHCP Snooping, IP Source Guard, Dynamic ARP Inspection, Access Control List (ACL)
  • High Performance Latest Broadcom 56G Wire-speed and 1.2G ARM Processor
  • Max. 8 Fiber Ports 20GT, 4 Giga SFP, and 4 Giga Combo
  • L3 and Router OS 150Mbps SW Routing RIP/OSPF, NAT, Firewall, VPN
  • EEE Low Power Efficiency <20W Low power consumption